REVERSE OSMOSIS | INDUSTRI AIR MINUM | SNI - AMDK | AIR MINUM ISI ULANG RO | DEPOT AIR MINUM | BISNIS AIR MINUM | FILTER AIR MINUM | INDONESIA
 
Artikel
Mesin Air Minum RO Yang Baik

Syarat Mesin Air Minum, AMDK & Isi Ulang Air RO serta Pabrikan RO yang Baik, Sehat dan Handal serta Bermanfaat bagi banyak orang haruslah memenuhi beberapa Kriteria, antara lain...
Spare Parts Mesin Air Minum RO

Kami mempunyai stock Spare Parts Reverse Osmosis / RO systems, RO Membrane, Pompa Booster Pump, Solenoid, Low Pressure Switch, TDS Meter, dll
SUPER PROMO

Free : AVR - Auto Volt Regulator 5.000 watt untuk 25 pembeli Victoria Depo air minum Isi Ulang Sehat RO 8.000 liter / 400 Galon - bebas dari bakteri. Promo juga Sikat Galon untuk Depot air minum.
Tanki Media Filter & Filter Air

Filter AirWater Filter Tank dan Media Filter kami tersedia dalam berbagai macam, diantaranya Structural, Wave Cyber, Luso Abg 11, Calgon, Greensand, FerroLite, dll.
 
victoria_reverse_osmosis

 



Hotline

Contact : Endah Candrawati
Address : Jl. Raya Bantulan Gamping 8
( Jalan Godean Km. 7 ) - Sidoarum
YOGYAKARTA 55564 - INDONESIA

Penjelasan : Klik di Gambar ini


Phone : 0274 - 6497 678
Fax : 0274 - 6497 879

Hand Phone :
Indosat : 0815 6879 123
XL : 0817 2379 123
Fren : 0888 2800 123
Telkomsel : 0812 36297 123










Cust Support : info@victoria-ro.com
E-mail : mail@victoria-ro.com


Total Visitors






PRINGSEWU
Win For Your Life 
   
   


 
Detail Artikel
Membrane Desal AG4040F GE Osmonic



Desal AG4040F GE Osmonics Membrane Brackish water 2200 gpd

Brackish Water Desalination Reverse Osmosis, High Rejection

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig ( 1, 379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.
AG4040F High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. This element is designed with male end connections.

Element Specifications
Model : AG4040F
Flow : 2, 200 GPD ( 8.3 m3/ d)
Active Area : 85 ft2 ( 7.9 m2)
Avg. Rejection : 99.5%
Min. Rejection : 99%

Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH 7.5 after 24 hours. Individual flux may vary + 25% / -15%

Operating and Design Parameters
Membrane : Thin Film Membrane ( TFM® )
Typical Operating Pressure : 200 psig ( 1, 379 kPa)
Maximum Pressure : 600 psig ( 4, 137 kPa)
Maximum Temperature : 122° F ( 50° C)
Chlorine Tolerance : 1, 000 ppm-hrs, dechlorination recommended
Optimum Rejection pH : 7.0 -7.5
Operating pH Range : 4.0 - 11.0
Cleaning pH Range : 2.0 - 11.5
Maximum Pressure Drop : 10 psig ( 69 kPa) per element , 50 psig ( 345 kPa) per vessel

Negara Asal:    Amerika Serikat


MENU UTAMA


Diposting tanggal : 02 October 2011
Oleh : Victoria

Leave a Reply

security image


Copyright © 2016 www.victoria-ro.com